Macronix MX29F800CBTI-70G
MX29F800CBTI-70G
Macronix MX29F800CBTI-70G information
Type
Parameter
Factory Lead Time
10 Weeks
Mounting Type
Surface Mount
Package / Case
48-TFSOP (0.724, 18.40mm Width)
Surface Mount
YES
Operating Temperature
-40°C~85°C TA
Packaging
Tray
Published
2008
Series
MX29F
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
48
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Additional Feature
BOTTOM BOOT BLOCK
HTS Code
8542.32.00.71
Technology
FLASH - NOR
Voltage - Supply
4.5V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.5mm
Reflow Temperature-Max (s)
40
Pin Count
48
JESD-30 Code
R-PDSO-G48
Qualification Status
Not Qualified
Operating Supply Voltage
5V
Power Supplies
5V
Memory Size
8Mb 1M x 8
Memory Type
Non-Volatile
Operating Mode
ASYNCHRONOUS
Supply Current-Max
0.05mA
Memory Format
FLASH
Memory Interface
Parallel
Organization
512KX16
Memory Width
16
Write Cycle Time - Word, Page
70ns
Density
8 Mb
Standby Current-Max
0.00005A
Access Time (Max)
70 ns
Programming Voltage
5V
Endurance
100000 Write/Erase Cycles
Alternate Memory Width
8
Data Polling
YES
Toggle Bit
YES
Command User Interface
YES
Number of Sectors/Size
12115
Sector Size
16K8K32K64K
Ready/Busy
YES
Boot Block
BOTTOM
Height Seated (Max)
1.2mm
Length
18.4mm
Width
12mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- PCN Packaging :
- Datasheets :
MX29F800CBTI-70G Overview
In this case, the memory type of the device can be classified as Non-Volatile. In addition, memory ics is available in a Tray case as well. 48-TFSOP (0.724, 18.40mm Width) case encloses it. On the chip, there is an 8Mb 1M x 8 memory, which is the size of the chip's memory. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. It is supplied votage within 4.5V~5.5V. As far as the mounting type is concerned, Surface Mount is recommended. It is planted on the chip with 48 terminations. The part supports at least 1 functions to ensure a comprehensive working process. In order to power this memory device, 5V will be necessary. There are 48 pins on this memory device, which indicates it has 48 memory locations in it. There is a note indicating that this memory chip operates at an 5V volt supply voltage. This chip is not only loaded with advantages, but it also comes with BOTTOM BOOT BLOCK, which boosts the performance of your system. This memory chip requires a mere 5V of power. This part, which belongs to the MX29F series of memory devices, plays an important role in its target applications. The device is able to run from a max supply current of 0.05mA , so it can be used in any environment. There is a need for a programming voltage of 5V in order to modify the state of some nonvolatile memory arrays. A total of 12115 specifically sized divisions are contained in this memory.
MX29F800CBTI-70G Features
Package / Case: 48-TFSOP (0.724, 18.40mm Width)
Operating Supply Voltage:5V
Additional Feature:BOTTOM BOOT BLOCK
MX29F800CBTI-70G Applications
There are a lot of Macronix MX29F800CBTI-70G Memory applications.
- eSRAM
- multimedia computers
- personal digital assistants
- servers
- embedded logic
- hard disk drive (HDD)
- networking
- Cache memory
- telecommunications
- workstations,
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Macronix's MX29F800CBTI-70G price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
