Macronix MX25L1606EM2I-12G
MX25L1606EM2I-12G
Macronix MX25L1606EM2I-12G information
Type
Parameter
Factory Lead Time
16 Weeks
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.209, 5.30mm Width)
Surface Mount
YES
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2016
Series
MX25xxx05/06
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Not For New Designs
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn) - annealed
HTS Code
8542.32.00.51
Technology
FLASH - NOR
Voltage - Supply
2.7V~3.6V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
1.27mm
Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
8
JESD-30 Code
R-PDSO-G8
Qualification Status
Not Qualified
Operating Supply Voltage
3.6V
Power Supplies
3/3.3V
Supply Voltage-Min (Vsup)
2.7V
Interface
SPI, Serial
Memory Size
16Mb 2M x 8
Memory Type
Non-Volatile
Operating Mode
SYNCHRONOUS
Clock Frequency
86MHz
Supply Current-Max
0.025mA
Memory Format
FLASH
Memory Interface
SPI
Organization
8MX2
Memory Width
2
Write Cycle Time - Word, Page
50μs, 3ms
Density
16 Mb
Standby Current-Max
0.00002A
Programming Voltage
2.7V
Serial Bus Type
SPI
Endurance
100000 Write/Erase Cycles
Write Protection
HARDWARE/SOFTWARE
Alternate Memory Width
1
Height Seated (Max)
2.16mm
Length
5.28mm
Width
5.23mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Packaging :
MX25L1606EM2I-12G Overview
As far as memory types are concerned, Non-Volatile is considered to be its memory type. In addition, memory ics is available in a Tube case as well. The file is embedded in a 8-SOIC (0.209, 5.30mm Width) case. There is 16Mb 2M x 8 of memory on the chip. Memory data is stored in FLASH-format, which is common in mainstream devices. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. The supply voltage can be up to 2.7V~3.6V. There is a recommended mounting type of Surface Mount for it. 8 terminations are planted on the chip. The comprehensive working procedure is supported by 1 functions in this part. An 3V supply is required for this ic memory chip to operate properly. In this memory, the clock frequency rotation is within an 86MHz range. It has 8 pins indicating it has 8 memory locations. According to the datasheet, this memory chip operates at an operating voltage of 3.6V. When it comes to power supplies, this memory chip only requires 3/3.3V . Its target applications rely heavily on the MX25xxx05/06 series memory devices. Its SPI-type serial bus helps transfer data to the CPU efficiently. The device is able to run from a max supply current of 0.025mA , so it can be used in any environment. Nonvolatile memory arrays require 2.7V programming voltages to change their states.
MX25L1606EM2I-12G Features
Package / Case: 8-SOIC (0.209, 5.30mm Width)
Operating Supply Voltage:3.6V
MX25L1606EM2I-12G Applications
There are a lot of Macronix MX25L1606EM2I-12G Memory applications.
- nonvolatile BIOS memory
- mainframes
- personal digital assistants
- Cache memory
- workstations,
- DVD disk buffer
- personal computers
- servers
- eDRAM
- multimedia computers
- ImagePart NumberManufacturerPackage / CaseDensityInterfaceStandby Current-MaxTerminal PitchOperating Supply VoltageSupply Current-MaxHeight Seated (Max)View Compare
MX25L1606EM2I-12G
Macronix8-SOIC (0.209, 5.30mm Width)
16 Mb
SPI, Serial
0.00002 A
1.27 mm
3.6 V
0.025 mA
2.16 mm
- MX25L1633EM2I-10GMacronix
8-SOIC (0.209, 5.30mm Width)
16 Mb
SPI, Serial
0.00002 A
1.27 mm
3.6 V
0.025 mA
2.16 mm
MX25L1606EM2I-12G
VS
MX25L1633EM2I-10G
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Macronix's MX25L1606EM2I-12G price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
