Monolithic Power Systems Inc. MP7740DN-LF-Z
MP7740DN-LF-Z
In Stock:94131
Not the price you want? Send RFQ Now and we'll contact you ASAP.
Inquire for More Quantity
Add to RFQ list
Monolithic Power Systems Inc. MP7740DN-LF-Z information
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width) Exposed Pad
Number of Pins
8
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2009
JESD-609 Code
e3
Feature
Depop, Short-Circuit and Thermal Protection
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
2A (4 Weeks)
Number of Terminations
8
ECCN Code
EAR99
Type
Class D
Terminal Finish
Matte Tin (Sn)
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Terminal Pitch
1.27mm
Pin Count
8
Output Type
1-Channel (Mono)
Number of Channels
1
Max Supply Voltage
36V
Min Supply Voltage
9.5V
Output Power
15W
Power Supply Rejection Ratio (PSRR)
60dB
Max Output Power
15W
Max Output Power x Channels @ Load
15W x 1 @ 4 Ω
Height Seated (Max)
1.7mm
Length
4.9mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
monolithicpowersystemsinc-mp4690gsdlfz-environmentalinformation-8889.pdf
MP7740DN-LF-Z Overview
There is a device embedded in 8-SOIC (0.154, 3.90mm Width) Exposed Pad .The chip is recommended to be packaged in Tape & Reel (TR) case. Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.The output it is configured with uses 1-Channel (Mono) .Class D is the type of this electrical device.8 pins are pronged contacts on a computer or other communication device that form a signal interface.A part of this electronic device is mounted in the way of Surface Mount .There are 1 channels available on the device.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection .No temperature higher than -40°C~85°C TA should be used for operations.In addition, it is equipped with 8 pins.A part of this electronic device is mounted in the way of Surface Mount .According to the manufacturer, the maximum output power of this electronic component is 15W kWh per hour.A maximal supply voltage of 36V is required for operation.As a result, it operates at a voltage of 9.5V V at the minimum.
MP7740DN-LF-Z Features
8-SOIC (0.154, 3.90mm Width) Exposed Pad package
8 pin count
15W kWh per hour
MP7740DN-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP7740DN-LF-Z audio amplifiers applications.
- Fast A/D and D/A converters, video amplifiers
- High/low-pass filter circuit
- ECG equipment
- Video conversion and routing
- Vehicle electronics
- Radar
- Automation control systems
- Industrial control system
- Scintillation detectors
- Inverse/same-phase proportional circuit
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of ChannelsMax Output PowerOutput PowerPower Supply Rejection Ratio (PSRR)Min Supply VoltageMax Supply VoltageView Compare
MP7740DN-LF-Z
Monolithic Power Systems Inc.8-SOIC (0.154, 3.90mm Width) Exposed Pad
8
1
15 W
15 W
60 dB
9.5 V
36 V
LM4871M/NOPBNA8-SOIC (0.154, 3.90mm Width)
8
1
3 W
3 W
60 dB
-
-
MP7740DN-LF-Z
VS
LM4871M/NOPB
- LM4871MX/NOPBNA
8-SOIC (0.154, 3.90mm Width)
8
1
3 W
3 W
60 dB
-
-
MP7740DN-LF-Z
VS
LM4871MX/NOPB
NCS2211DR2GON Semiconductor8-SOIC (0.154, 3.90mm Width)
8
1
1.5 W
1.5 W
75 dB
-
-
MP7740DN-LF-Z
VS
NCS2211DR2G
- LM4871MXNA
8-SOIC (0.154, 3.90mm Width)
8
1
3 W
3 W
60 dB
-
-
MP7740DN-LF-Z
VS
LM4871MX
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Monolithic Power Systems's MP7740DN-LF-Z price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
