Cypress Semiconductor Corp CY2308SXC-2
CY2308SXC-2
Please send RFQ , we will respond immediately.
Cypress Semiconductor Corp CY2308SXC-2 information
Type
Parameter
Factory Lead Time
6 Weeks
Contact Plating
Gold, Tin
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Number of Pins
16
Operating Temperature
0°C~70°C
Packaging
Tube
Published
1996
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
16
ECCN Code
EAR99
Type
Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Clock Drivers
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Frequency
133.3MHz
Reflow Temperature-Max (s)
30
Base Part Number
CY2308
Output
LVCMOS
Pin Count
16
Number of Outputs
8
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
3V
Number of Circuits
1
Nominal Supply Current
45mA
Input
LVCMOS, LVTTL
Ratio - Input:Output
1:8
PLL
Yes
Differential - Input:Output
No/No
Divider/Multiplier
Yes/Yes
Same Edge Skew-Max (tskwd)
0.2 ns
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
cypresssemiconductorcorp-cy467269103pod-environmentalinformation-2998.pdf
- PCN Obsolescence/ EOL :
cypresssemiconductorcorp-cy8c5888axqlp096-pcnobsolescenceeol-1262.pdf
- PCN Assembly/Origin :
- PCN Packaging :
cypresssemiconductorcorp-cy467269103pod-pcnpackaging-3001.pdf
cypresssemiconductorcorp-cy467269103pod-pcnpackaging-3002.pdf
- RohsStatement :
CY2308SXC-2 Overview
Clock ICs are packaged using the Tube method. The 16-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, LVTTL is designed for clock generator's input. It is possible to access the full performance of the electrical part by implementing 1 circuits. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. It's compatible with LVCMOS logic levels. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. In particular, this clock PLL is designed to be used with microprocessors. This part number is related to its related electronic parts. A 16 pin is available on the clock PLL. Supply voltage 3.3V is what time clock generator can handle. The clock PLL is generally classified as a Clock Drivers device. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. Low timing skew is provided by this analog clock generator at maximum 0.2 ns. At a frequency of 133.3MHz, the system can achieve high efficiency.
CY2308SXC-2 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-2 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-2 Clock Generators applications.
- Automatic test equipment
- Signal demodulation
- Electronic equipment
- FSK demodulators
- Jitter reduction
- Wireless base station for LTE, LTE-advanced
- Skew suppression
- Coherent detection of the signal
- Mobile telephones
- Myriad digital applications
- ImagePart NumberManufacturerPackage / CaseNumber of PinsPLLInputNumber of OutputsSupply VoltageOperating Supply VoltageView Compare
CY2308SXC-2
Cypress Semiconductor Corp16-SOIC (0.154, 3.90mm Width)
16
Yes
LVCMOS, LVTTL
8
3.3 V
3.3 V
- CY2308SXI-2Cypress Semiconductor Corp
16-SOIC (0.154, 3.90mm Width)
16
Yes
LVCMOS, LVTTL
8
3.3 V
3.3 V
CY2308SXC-2
VS
CY2308SXI-2
- CY2308SXI-2TCypress Semiconductor Corp
16-SOIC (0.154, 3.90mm Width)
16
Yes
LVCMOS, LVTTL
8
3.3 V
3.3 V
CY2308SXC-2
VS
CY2308SXI-2T
- CY2308SC-2Cypress Semiconductor Corp
16-SOIC (0.154, 3.90mm Width)
16
Yes
LVCMOS, LVTTL
8
3.3 V
3.3 V
CY2308SXC-2
VS
CY2308SC-2
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Cypress Semiconductor's CY2308SXC-2 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
