STMicroelectronics LD1117DT33CTR
LD1117DT33CTR
STMicroelectronics LD1117DT33CTR information
Type
Parameter
Factory Lead Time
24 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
TO-252-3, DPak (2 Leads + Tab), SC-63
Number of Pins
3
Weight
4.535924g
Operating Temperature
-40°C~125°C
Packaging
Tape & Reel (TR)
Tolerance
1%
JESD-609 Code
e3
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
2
ECCN Code
EAR99
Power Rating
12W
Max Power Dissipation
12W
Technology
BIPOLAR
Terminal Position
SINGLE
Terminal Form
GULL WING
Number of Functions
1
Terminal Pitch
2.28mm
Base Part Number
LD1117
Pin Count
3
JESD-30 Code
R-PSSO-G2
Number of Outputs
1
Voltage - Input (Max)
15V
Output Voltage
3.3V
Output Type
Fixed
Max Output Current
1.3A
Output Configuration
Positive
Power Dissipation
12W
Current - Output
800mA
Quiescent Current
10mA
Accuracy
1 %
Output Voltage 1
3.3V
Number of Regulators
1
Min Input Voltage
4.75V
Protection Features
Over Current, Over Temperature
Voltage Dropout (Max)
1.3V @ 800mA
PSRR
75dB (120Hz)
Dropout Voltage
1.1V
Nominal Output Voltage
3.3V
Input Bias Current
5mA
Output Voltage Accuracy
1 %
Height
2.4mm
Length
6.6mm
Width
6.2mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
LD1117DT33CTR Overview
This Voltage Regulator IC comes inTape & Reel (TR) packaging. There is a TO-252-3, DPak (2 Leads + Tab), SC-63 case with the integrated voltage regulator. In total, there are 2 terminations on the gadget. The IC chip's output type is Fixed. This component features 1 Voltage regulators. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. The Regulator IC chip is set to operate at -40°C~125°C degrees. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. There is a current output of 800mA from this regulator IC. A total of 3 pins are located on this chip, making it the size of a standard chip. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 1 outputs in total. There is a voltage dropout of 10 volts for this IC regulator. 3 pins are on the chip. For your information, this regulator's basic part number is LD1117. In order to meet the operating requirements of the regulator, its maximal output current reaches 1.3A. It operates in the 10mA Quiescent Current state. Speaking of tolerance, this voltage regulator IC is characterized to have 1% tolerance, which is quite low.
LD1117DT33CTR Features
1.1V dropout voltage
1% tolerance
LD1117DT33CTR Applications
There are a lot of STMicroelectronics LD1117DT33CTR Linear Voltage Regulators applications.
- Camera
- Ethernet condition monitoring vibration sensor
- μC power
- EPS (Electric Power Steering)
- Car infotainment
- Smart manufacturing
- Low-voltage microprocessor power supplies
- Bypass circuit
- SoC
- Medical Applications: Diagnostics and Imaging
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of OutputsMax Output CurrentMin Input VoltageVoltage - Input (Max)Nominal Output VoltageOutput VoltageAccuracyView Compare
LD1117DT33CTR
STMicroelectronicsTO-252-3, DPak (2 Leads + Tab), SC-63
3
1
1.3 A
4.75 V
15V
3.3 V
3.3 V
1 %
LD1117DTC-RSTMicroelectronicsTO-252-3, DPak (2 Leads + Tab), SC-63
3
1
1.3 A
-
-
-
15 V
1 %
LD1117DT33CTR
VS
LD1117DTC-R
- LD1117DT50TRSTMicroelectronics
TO-252-3, DPak (2 Leads + Tab), SC-63
3
1
1.3 A
-
15V
5 V
5 V
1 %
LD1117DT33CTR
VS
LD1117DT50TR
.png)
LD1117DT18STMicroelectronicsTO-252
3
1
1.3 A
3.8 V
-
1.8 V
-
1 %
LD1117DT33CTR
VS
LD1117DT18
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the STMicroelectronics's LD1117DT33CTR price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
