Silicon Labs C8051F410-GQ
Silicon Labs C8051F410-GQ information
Type
Parameter
Factory Lead Time
8 Weeks
Contact Plating
Tin
Mounting Type
Surface Mount
Package / Case
32-LQFP
Surface Mount
YES
Number of Pins
32
Operating Temperature
-40°C~85°C TA
Packaging
Tray
Published
2000
Series
C8051F41x
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
32
Termination
SMD/SMT
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Terminal Pitch
0.8mm
Frequency
50MHz
Base Part Number
C8051F41
Pin Count
32
Supply Voltage-Max (Vsup)
5.25V
Supply Voltage-Min (Vsup)
2V
Number of Channels
6
Interface
2-Wire, I2C, SMBus, SPI, UART, USART
Memory Size
32kB
Oscillator Type
Internal
Number of I/O
24
RAM Size
2.25K x 8
Voltage - Supply (Vcc/Vdd)
2V~5.25V
uPs/uCs/Peripheral ICs Type
MICROCONTROLLER
Core Processor
8051
Peripherals
Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Program Memory Type
FLASH
Core Size
8-Bit
Program Memory Size
32KB 32K x 8
Connectivity
SMBus (2-Wire/I2C), SPI, UART/USART
Bit Size
8
Data Converter
A/D 24x12b; D/A 2x12b
Watchdog Timer
Yes
Access Time
50 μs
Has ADC
YES
DMA Channels
NO
Data Bus Width
8b
PWM Channels
YES
Number of Timers/Counters
4
Density
256 kb
Number of ADC Channels
27
Number of SPI Channels
1
Height
1.45mm
Length
7mm
Width
7mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
RoHS Compliant
Lead Free
Lead Free
- Datasheets :
C8051F410-GQ Overview
There is a 32-LQFP package available. There are 24 I/Os. Using the Mounting Type Surface Mount, the MCU is mounted on PCB. Microcontroller is based on the 8-Bit core architecture. The type of its program memory is FLASH. The temperature range that this Microcontroller operates at is -40°C~85°C TA. The C8051F41x series is comprised of this electrical component. There is 32KB 32K x 8 bytes of program memory in MCU, which corresponds to the size of the program. With a 8051 Core Processor, Microcontroller is fast and efficient. This is a MICROCONTROLLER uPs/uCs/Peripheral IC. The MCU has a number of 32 terminals. As a result, this Microcontroller comes with a 8-bit size. A total of NO DMA channels are available on MCU chip. 32kB memory size belongs to the Chip part. There are a number of alternatives to the base part number C8051F41 that you can find. At a frequency of 50MHz, Microcontroller can operate efficiently. The device works in YES PWM channels. Located on the chip are 32 pins. In total, there are 4 timers/counters on the device. It has 32 pins in total. It has a total of 27 ADC channels.
C8051F410-GQ Features
32-LQFP package
Mounting type of Surface Mount
C8051F410-GQ Applications
There are a lot of Silicon Labs C8051F410-GQ Microcontroller applications.
- Routers
- Teletext terminals
- Volt meter
- Microwave ovens
- Glucose monitoring systems
- Gas monitoring systems
- Ipad
- Light sensing & controlling devices
- Virtual reality VR robots
- Missile control
- ImagePart NumberManufacturerPackage / CaseNumber of PinsData Bus WidthNumber of I/OInterfaceMemory SizePeripheralsMoisture Sensitivity Level (MSL)View Compare
C8051F410-GQ
Silicon Labs32-LQFP
32
8 b
24
2-Wire, I2C, SMBus, SPI, UART, USART
32 kB
Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
3 (168 Hours)
- C8051F412-GQSilicon Labs
32-LQFP
32
8 b
24
2-Wire, I2C, SMBus, SPI, UART, USART
16 kB
Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
3 (168 Hours)
C8051F410-GQ
VS
C8051F412-GQ
- C8051F387-GQRSilicon Labs
32-LQFP
32
8 b
25
I2C, SPI, UART, USART, USB
32 kB
Brown-out Detect/Reset, POR, PWM, WDT
3 (168 Hours)
C8051F410-GQ
VS
C8051F387-GQR
- C8051F506-IQRSilicon Labs
32-LQFP
32
8 b
25
2-Wire, CAN, I2C, LIN, SMBus, SPI, UART, USART
32 kB
POR, PWM, Temp Sensor, WDT
3 (168 Hours)
C8051F410-GQ
VS
C8051F506-IQR
- AT89C5115-RATUMMicrochip Technology
32-LQFP
32
8 b
20
UART, USART
16 kB
POR, PWM, WDT
3 (168 Hours)
C8051F410-GQ
VS
AT89C5115-RATUM
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Silicon Labs's C8051F410-GQ price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
