Omron Automation and Safety E2A-M18KN16-M1-B1
E2A-M18KN16-M1-B1
Omron Automation and Safety E2A-M18KN16-M1-B1 information
Type
Parameter
Factory Lead Time
2 Weeks
Mount
Flush, Panel
Package / Case
Cylinder, Threaded - M18
Number of Pins
4
Housing Material
Brass
Material - Body
Nickel-Plated Brass
Operating Temperature
-40°C~70°C
Published
2001
Series
E2A
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Termination
Connector
Max Operating Temperature
70°C
Min Operating Temperature
-40°C
Voltage - Supply
10V~32V
Shielding
Unshielded
Ingress Protection
IP67, IP69K
Termination Style
Connector
Output Type
PNP-NO, 3-Wire
Operating Supply Voltage
24V
Max Supply Voltage
32V
Min Supply Voltage
10V
Operating Supply Current
10mA
Sensing Distance
0.630 (16mm)
Sensor Type
Inductive
Sensing Method
Inductive
Indicator
LED
Response Frequency
400Hz
Max Supply Voltage (DC)
32V
Min Supply Voltage (DC)
10V
Switching Frequency
400Hz
Switching Current
200mA
Height
24mm
Length
48mm
Width
27.7mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
RoHS Compliant
Ratings
IP67
- Datasheets :
- Mfg CAD Models :
E2A-M18KN16-M1-B1 Overview
We have included it as part of the Cylinder, Threaded - M18 package for your convenience. With an operating temperature of -40°C~70°C, proximity sensors can work efficiently. It has a pin count of 4. To maximize efficiency, proximity sensors should have their supply voltage set to 24V. Despite their low operating temperature -40°C, proximity sensors are still able to function. It is not possible for the proximity sensors to operate above 70°C. The rate should be 400Hz to ensure that switch of the proximity sensors performs its function. The current that the reed switch's internal contacts pass should be 200mA to make the proximity sensors work well. In a DC circuit, the maximum voltage of 32V is pemissible for proximity sensors. The current drawn by the proximity sensors in the DC circuit should not be less than 10V, otherwise it will be dangerous. Set this electronic part's current to 10mA to maximize efficiency.
E2A-M18KN16-M1-B1 Features
E2A Series
Operating Temperature: -40°C~70°C
Sensing Distance: 0.630 (16mm)
Voltage - Supply: 10V~32V
Response Frequency: 400Hz
Package / Case: Cylinder, Threaded - M18
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Supply Current: 10mA
E2A-M18KN16-M1-B1 Applications
There are a lot of Omron Automation and Safety E2A-M18KN16-M1-B1 Proximity Sensors applications.
- Automation
- Office automation equipment
- Contact less switching
- Automatic faucet
- Collision detection on robots
- Anti-aircraft systems
- Rolling mills
- Lighting
- Notebooks
- PC monitors
- ImagePart NumberManufacturerNumber of PinsMountSensing DistanceResponse FrequencyShieldingTerminationMin Supply VoltageMin Supply Voltage (DC)Max Supply VoltageMax Supply Voltage (DC)View Compare
E2A-M18KN16-M1-B1
Omron Automation and Safety4
Flush, Panel
0.630 (16mm)
400Hz
Unshielded
Connector
10 V
10 V
32 V
32 V
E2A-M18LN16-M1-B1Omron Automation and Safety4
Panel
0.630 (16mm)
400Hz
Unshielded
Connector
10 V
12 V
32 V
24 V
E2A-M18KN16-M1-B1
VS
E2A-M18LN16-M1-B1
E2A-M30KN20-M1-B1Omron Automation and Safety4
Flush, Panel
0.787 (20mm)
100Hz
Unshielded
Connector
10 V
10 V
32 V
32 V
E2A-M18KN16-M1-B1
VS
E2A-M30KN20-M1-B1
E2A-M18LN16-M1-C1Omron Automation and Safety4
Panel
0.630 (16mm)
400Hz
Unshielded
Connector
10 V
-
32 V
-
E2A-M18KN16-M1-B1
VS
E2A-M18LN16-M1-C1
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Omron Automation & Safety Services's E2A-M18KN16-M1-B1 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
