Microchip Technology PIC16F874-20/P
PIC16F874-20/P
Microchip Technology PIC16F874-20/P information
Type
Parameter
Factory Lead Time
6 Weeks
Mounting Type
Through Hole
Package / Case
40-DIP (0.600, 15.24mm)
Surface Mount
NO
Number of Pins
40
Operating Temperature
0°C~70°C TA
Packaging
Tube
Published
1997
Series
PIC® 16F
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
40
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Subcategory
Microcontrollers
Max Power Dissipation
1W
Technology
CMOS
Terminal Position
DUAL
Supply Voltage
5V
Frequency
20MHz
Base Part Number
PIC16F874
Pin Count
40
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
5V
Supply Voltage-Min (Vsup)
4.5V
Interface
I2C, SPI, SSP, UART, USART
Memory Size
7kB
Oscillator Type
External
Number of I/O
33
Nominal Supply Current
1.6mA
RAM Size
192 x 8
Voltage - Supply (Vcc/Vdd)
4V~5.5V
uPs/uCs/Peripheral ICs Type
MICROCONTROLLER, RISC
Core Processor
PIC
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Program Memory Type
FLASH
Core Size
8-Bit
Program Memory Size
7KB 4K x 14
Connectivity
I2C, SPI, UART/USART
Bit Size
8
Data Converter
A/D 8x10b
Watchdog Timer
Yes
Access Time
20 μs
Has ADC
YES
DMA Channels
NO
Data Bus Width
8b
Number of Timers/Counters
3
Address Bus Width
8b
EEPROM Size
128 x 8
CPU Family
PIC
Number of A/D Converters
1
Number of ADC Channels
8
Number of PWM Channels
2
Height
4.06mm
Length
52.45mm
Width
14.22mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
PIC16F874-20/P Overview
This Microcontroller comes in a 40-DIP (0.600, 15.24mm) package. This Microcontroller has 33 I/Os. The Microcontroller's mounting type is Through Hole and this IC chip has the following features. 8-Bit core is the basis for this Microcontroller. The type of memory that the program uses is FLASH. The temperature range that this Microcontroller operates at is 0°C~70°C TA. It is part of the PIC® 16F series of electrical components. This program has a program memory of 7KB 4K x 14 bytes, which is the size of the program. A PIC Core processor is used to power the device. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. The MCU has a number of 40 terminals. Microcontroller comes with 8 bit size. An output voltage of 5V volts is available for this Microcontroller chip. There are NO DMA channels on this Microcontroller chip. 7kB is the size of the memory in the IC part. It is possible to find alternatives to the base part number PIC16F874 by using the part number search tool. At a frequency of 20MHz, Microcontroller can operate efficiently. On the chip, there are 40 pins that can be accessed. In total, it has 3 timers and counters in it. There are 40 pins on it. There is an embedded the PIC CPU family inside the device, which makes it a powerful device. A total of 8 ADC channels are present in this device. There are 1 A/D converters built into the device, which makes it quite versatile. A total of 2 PWM channels are used by the device.
PIC16F874-20/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F874-20/P Applications
There are a lot of Microchip Technology PIC16F874-20/P Microcontroller applications.
- X-ray
- Industrial instrumentation devices
- Washing machines
- Dryers
- DDC control
- Electronic jamming systems
- Industrial robot
- Washing machine
- Magnetic resonance imaging (MRI)
- Process control devices
- ImagePart NumberManufacturerPackage / CaseNumber of PinsData Bus WidthNumber of I/OInterfaceMemory SizeSupply VoltagePeripheralsView Compare
PIC16F874-20/P
Microchip Technology40-DIP (0.600, 15.24mm)
40
8 b
33
I2C, SPI, SSP, UART, USART
7 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
- PIC16F74-I/PMicrochip Technology
40-DIP (0.600, 15.24mm)
40
8 b
33
I2C, SPI, SSP, UART, USART
7 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
PIC16F874-20/P
VS
PIC16F74-I/P
- PIC16C65B-20/PMicrochip Technology
40-DIP (0.600, 15.24mm)
40
8 b
33
I2C, SPI, UART, USART
7 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
PIC16F874-20/P
VS
PIC16C65B-20/P
- PIC16F747-I/PMicrochip Technology
40-DIP (0.600, 15.24mm)
40
8 b
36
I2C, SPI, UART, USART
7 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
PIC16F874-20/P
VS
PIC16F747-I/P
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's PIC16F874-20/P price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
