Maxim Integrated MAX485CSA+T
MAX485CSA+T
Maxim Integrated MAX485CSA+T information
Type
Parameter
Factory Lead Time
6 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Weight
142.994995mg
Operating Temperature
0°C~70°C
Packaging
Tape & Reel (TR)
Published
2005
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Type
Transceiver
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
4.75V~5.25V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Base Part Number
MAX485
Pin Count
8
Operating Supply Voltage
5V
Power Supplies
5V
Interface
RS-422, RS-485
Operating Supply Current
500μA
Supply Current-Max
0.9mA
Data Rate
2.5Mbps
Output Characteristics
3-STATE
Differential Output
YES
Output Polarity
COMPLEMENTARY
Protocol
RS422, RS485
Input Characteristics
DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers
1/1
Driver Number of Bits
1
Receiver Number of Bits
1
Duplex
Half
Receiver Hysteresis
50mV
Number of Transceivers
1
Receive Delay-Max
200 ns
Simplex/Duplex
Half Duplex
Transmit Delay-Max
60 ns
Output Low Current-Max
0.004A
Height
1.5mm
Length
5mm
Width
4mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Application Notes :
- TechnicalDrawing :
- ConflictMineralStatement :
maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf
MAX485CSA+T Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply for this differential driver is 4.75V~5.25V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Driver ICs with a supply voltage range of 5V can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.It is packaged with 8 pinouts that are market standard for this particular transceiver.Since the base part number MAX485 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.This IC implements 1 transceivers overall.To power the ic receiver, sufficient current but not more than 0.9mA should be supplied to its VCC pin.Input voltage is set to a value of 500μA, and this integrating circuit is capable of driving LEDs with that voltage.
MAX485CSA+T Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
MAX485CSA+T Applications
There are a lot of Maxim Integrated MAX485CSA+T Drivers/Receivers/Transceivers applications.
- Switches
- Bridges
- Wireless smart house
- VoIP phones
- Metro access rings
- Fiber optic cable connection network
- Aircraft navigation
- Long-distance fiber optic network applications
- Wireless communication
- Wireless projection application for conferences
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInterfaceDriver Number of BitsReceiver Number of BitsData RateSupply VoltageMoisture Sensitivity Level (MSL)View Compare
MAX485CSA+T
Maxim Integrated8-SOIC (0.154, 3.90mm Width)
8
RS-422, RS-485
1
1
2.5Mbps
5 V
1 (Unlimited)
ADM4856ARZAnalog Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
RS-422, RS-485
1
1
2.5Mbps
5 V
1 (Unlimited)
MAX485CSA+T
VS
ADM4856ARZ
- MAX481CSA+Maxim Integrated
8-SOIC (0.154, 3.90mm Width)
8
RS-422, RS-485
1
1
2.5Mbps
5 V
1 (Unlimited)
MAX485CSA+T
VS
MAX481CSA+
DS485TMNA8-SOIC (0.154, 3.90mm Width)
8
RS-422, RS-485
1
-
2.5Mbps
5 V
1 (Unlimited)
MAX485CSA+T
VS
DS485TM
- DS481TM/NOPBNA
8-SOIC (0.154, 3.90mm Width)
8
RS-422, RS-485
1
-
2Mbps
5 V
1 (Unlimited)
MAX485CSA+T
VS
DS481TM/NOPB
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-2's MAX485CSA+T price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
