Maxim Integrated DS1010-150
DS1010-150
Maxim Integrated DS1010-150 information
Type
Parameter
Mounting Type
Through Hole
Package / Case
14-DIP (0.300, 7.62mm)
Surface Mount
NO
Operating Temperature
0°C~70°C
Packaging
Tube
Published
1999
JESD-609 Code
e0
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn/Pb)
Subcategory
Delay Lines
Technology
CMOS
Voltage - Supply
4.75V~5.25V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
240
Supply Voltage
5V
Terminal Pitch
2.54mm
Reach Compliance Code
not_compliant
Reflow Temperature-Max (s)
20
Base Part Number
DS1010
Function
Nonprogrammable
Qualification Status
Not Qualified
Supply Voltage-Max (Vsup)
5.25V
Power Supplies
5V
Supply Voltage-Min (Vsup)
4.75V
Output Polarity
TRUE
Logic IC Type
SILICON DELAY LINE
Power Supply Current-Max (ICC)
75mA
Number of Taps/Steps
10
Number of Independent Delays
1
Delay to 1st Tap
15ns
Programmable Delay Line
NO
Available Total Delays
150ns
Total Delay-Nom (td)
150 ns
Height Seated (Max)
4.572mm
Width
7.62mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
- Datasheets :
- ConflictMineralStatement :
maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf
DS1010-150 Overview
In order to minimize costs, Tube is used to package it. With the 14-DIP (0.300, 7.62mm) package, additional insulating hardware in applications is no longer necessary. Providing reliable performance requires a voltage supply of 4.75V~5.25V. In order to mount this device, the technique of Through Hole is used. It features 0°C~70°C operating temperature. Taps and steps are configured with 10. In a wide range of applications, parts with the same base part number DS1010 are universally preferred. There are two terminals at DUAL. The system is equipped with 14 terminations for a unique configuration. When the device is operating, it is supplied with a voltage of 5V. As a logic type, it uses SILICON DELAY LINE. A state-of-the-art CMOS technology is used in its development. The subcategory of Delay Lines provides all the benefits of the subcategory. Providing it with a minimum supply voltage of 4.75V is acceptable. If the maximum supply voltage is 5.25V, it is acceptable for it to operate. There is a power supply provided in 5V to ensure flexibility of operation.
DS1010-150 Features
Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
supply type: 5V
DS1010-150 Applications
There are a lot of Maxim Integrated DS1010-150 Delay Lines Timing ICs applications.
- Embedded Systems
- Utility Meters
- Signal Generators and Analyzers
- Synchronization of clock and data
- Multiphase Clock Generation
- High Vibration, High Acceleration Environments
- Telecommunications
- Security Systems
- Serial data transmissions up to 32 Gbps
- Portable and Battery-Powered Equipment
- ImagePart NumberManufacturerPackage / CaseSupply VoltageMounting TypeTerminal PositionPower SuppliesPackagingVoltage - SupplyECCN CodeView Compare
DS1010-150
Maxim Integrated14-DIP (0.300, 7.62mm)
5 V
Through Hole
DUAL
5 V
Tube
4.75V ~ 5.25V
EAR99
SN65176BPNA8-DIP (0.300, 7.62mm)
5 V
Through Hole
DUAL
5 V
Tube
4.75V ~ 5.25V
EAR99
DS1010-150
VS
SN65176BP
SN74LS139ANNA16-DIP (0.300, 7.62mm)
5 V
Through Hole
DUAL
5 V
Tube
4.75V ~ 5.25V
EAR99
DS1010-150
VS
SN74LS139AN
- MAX487ECPA+Maxim Integrated
8-DIP (0.300, 7.62mm)
5 V
Through Hole
DUAL
5 V
Tube
4.75V ~ 5.25V
EAR99
DS1010-150
VS
MAX487ECPA+
SN74LS21NNA14-DIP (0.300, 7.62mm)
5 V
Through Hole
DUAL
5 V
Tube
4.75V ~ 5.25V
EAR99
DS1010-150
VS
SN74LS21N
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-2's DS1010-150 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
