Diodes Incorporated AP2204K-ADJTRG1
AP2204K-ADJTRG1
Diodes Incorporated AP2204K-ADJTRG1 information
Type
Parameter
Factory Lead Time
23 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
SC-74A, SOT-753
Number of Pins
5
Supplier Device Package
SOT-23-5
Weight
29.993795mg
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
Published
2010
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Max Operating Temperature
125°C
Min Operating Temperature
-40°C
Current - Supply (Max)
2.5mA
Number of Outputs
1
Voltage - Input (Max)
24V
Output Voltage
22V
Output Type
Adjustable
Max Output Current
250mA
Polarity
Positive
Number of Channels
1
Max Supply Voltage
24V
Min Supply Voltage
2.6V
Output Configuration
Positive
Current - Output
150mA
Quiescent Current
50μA
Control Features
Enable
Voltage - Output (Min/Fixed)
1.24V
Number of Regulators
1
Min Input Voltage
2.3V
Protection Features
Over Current, Over Temperature
Current - Quiescent (Iq)
50μA
Voltage Dropout (Max)
0.5V @ 150mA
Max Input Voltage
24V
PSRR
60dB (100Hz ~ 1kHz)
Reference Voltage
1.24V
Dropout Voltage
360mV
Power Supply Rejection Ratio (PSRR)
60dB
Voltage - Output (Max)
22V
Max Junction Temperature (Tj)
125°C
Height
1.4mm
Length
3.02mm
Width
1.7mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
diodesincorporated-desd5v0s1ba7-environmentalinformation-9032.pdf
- PCN Assembly/Origin :
AP2204K-ADJTRG1 Overview
This Voltage Regulator IC comes inTape & Reel (TR) packaging. The Liner regulator IC is packaged in SC-74A, SOT-753 case. Adjustable is the IC Voltage Regulator's output type. A total of 1 regulators are implemented in this eletric component. Surface Mount operating temperature varies depending on the IC Voltage Regulator. The Voltage Regulated IC operates at a temperature of -40°C~85°C degrees, which is its operating temperature. In this case, the output function that is configured for this regulator IC is Positive. In terms of its current output, it is able to supply 150mA. To ensure prompt, sufficient performance, this part features 1 outputs in total. As far as its dropout voltage is concerned, it is 10 volts. On the chip, there are pins for the 5 axis. A maximum output current of 250mA is required to meet the operation requirements. It operates in the 50μA Quiescent Current state. The regulator operates with a maximum operating temperature of 125°C. During the operation of the chip, the chip's operating temperature is not less than -40°C degrees. The voltage regulator IC can operate at a supply voltage of 24V volts. Each of the 1 channels in this IC voltage regulator has a specific task to keep the system working.
AP2204K-ADJTRG1 Features
360mV dropout voltage
The maximum operating temperature of -40°C
AP2204K-ADJTRG1 Applications
There are a lot of Diodes Incorporated AP2204K-ADJTRG1 Linear Voltage Regulators applications.
- PLL (Phase-Locked Loop)
- Engine management
- Telecom and datacom applications
- SMPS (Switching-Mode Power Supply)
- Clock power supplies
- Power generator plants
- Electronic modules
- Voltage tracker protection circuits
- Analog control systems
- High Speed/High Precision Data Converters
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of OutputsMax Output CurrentMin Input VoltageMax Input VoltageVoltage - Input (Max)Output VoltageVoltage - Output (Max)Dropout VoltageView Compare
AP2204K-ADJTRG1
Diodes IncorporatedSC-74A, SOT-753
5
1
250 mA
2.3 V
24 V
24V
22 V
22V
360 mV
MIC5504-3.3YM5-TRMicrochip TechnologySC-74A, SOT-753
5
1
300 mA
2.5 V
-
5.5V
3.3 V
-
160 mV
AP2204K-ADJTRG1
VS
MIC5504-3.3YM5-TR
- MIC5504-2.8YM5-TRMicrochip Technology
SC-74A, SOT-753
5
1
300 mA
2.5 V
-
5.5V
2.8 V
-
160 mV
AP2204K-ADJTRG1
VS
MIC5504-2.8YM5-TR
TLV70233DBVRTexas InstrumentsSC-74A, SOT-753
5
1
300 mA
2 V
-
5.5V
3.3 V
-
375 mV
AP2204K-ADJTRG1
VS
TLV70233DBVR
- TLV70237DBVRTexas Instruments
SC-74A, SOT-753
5
1
300 mA
2 V
-
5.5V
3.7 V
-
375 mV
AP2204K-ADJTRG1
VS
TLV70237DBVR
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Diodes Incorporated's AP2204K-ADJTRG1 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
